Water Based Wood Filler Specifications:

Tengyu TA112 stainable, lightweight wood filler – fast-drying, easy to sand & paint, perfect for contractors and bulk furniture projects.

Characteristics

• Excellent adhesion to most building materials

• Easy sanding & fairing, smooth finish

• Non-slumping, non-shrinking

• Overcoatable with water & oil-based paints

• Non-toxic, low VOC

• Single-component, fast-drying

• Clean-up easily with water before curing

Technical Data

Applications

TA112 Latex based wood filler​ is designed for following application:

• Fill holes, cracks, and gaps in furniture, molding, cabinets, trim
• Repair minor dents and scratches
• Build up or reshape wood surfaces before sanding & staining

Description For Use

1. All surfaces need to be clean and dry with no loose or powdery material.
2. For best results when applying to exterior surfaces, prime surfaces first.
3. Press filler firmly into place with a filling knife.
4. For deeper cavities apply in layers up to 8mm thick, allowing each layer to dry before reapplying next layer.
5. Fast dry – Nail holes in 15 minutes. Large holes 3 hours. Allow to dry before sanding and painting.
6. Drying time will be extended in humid or cold conditions. Do not apply below 5℃.
7. Can be over painted with both acrylic and turpentine based paint systems.
8. Clean up in water.

Storage

Store in the original sealed packaging at temperatures of between 0℃ and 30℃, this product is sensitive to frost and must be kept in tightly closed packaging. The shelf life is about 18 months when stored in a cool and dry place.

Note

Keep contents out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible.